Product Description:

Diatone Mamba Stack APP F722 MK1 Flight Controller + 55A 3-6S F55 128K ESC 30.5x30.5mm

MAMBA F722S APP  I2C WIFI  55A 128K 3-6S Flight Controller Stack

Firmware Target /Config： Mamba F722 I2C 

About WIFI APP

Diagram Link From Help Centre Link

Note：Since STM32F722 heat large ， please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.

Update Details:

BT to WiFi
USB power supply can use receiver, OSD
Add a group of I2C pads (SCL SDA)
Add inverter Dual-Way TX serial port
Add 2812 LED switch function, key can turn off led
Add 4 corner LED interface to support BF led and Mamba led
Upgrade to stronger type-C, optimize pad position

FC Specifications

• MCU: 216MHz STM32F722RET6 32BIT
• IMU: MPU6000
• Barometer: No
• OSD: BF OSD
• Blacbox: 16M Flash Memory
• Uarts: 6Set
• ESC Soft: Dshot300/600/1200
• ESC Telemetry: RX6
• LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V

• LED Controller:BF LED/MB LED（ 4 Set 2812 LED）
• WIFI: SpeedyBee APP
• Smartaudio: Yes
• Buzz: Yes
• Input: 3~6S Lipo (12.6~25V)
• TVS Protection: Yes
• BEC: 5V 2.5A & 9V 2A (Max 3A)
• MOUNTING: 30.5mm/M3 WEIGHT: 9g
• Supply :
• 8pin sh1.0 *1
• Smartaudio: Yes
• Buzz: Yes
• Input: 3~6S Lipo (12.6~25V)
• VTS Protection: Yes

ESC Specifications

• MAMBA 55A F55_128K
• INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
• CONTINUE CURRENT:50A×4
• BURST CURRENT:60A (10S)
• BEC: No
• Target：BLHeli_32 MAMBA  F55_128K
• SOFT: Dshot300/600/1200
• TVS Protection: Yes
• MOUNTING: 30.5mm/M3

Supply:

• 1x High Frequency 470uF/35V
• 2x 8pin sh1.0
• 2x 12AWG 100mm
• 1x AMASS Original XT60

About  SpeedyBee Function：

For  WIFI

For  BlueTooth