Matek GPS MODULE SAM-M8Q

  • $37.95

Delivery Estimate: Orders before 3pm dispatch from Sydney on same business day


Like us? Please hit the Like button below:)


Product Description:

Matek SAM-M8Q Ublox GPS MODUblox GLONASS, Galileo, QZSS and SBAS receiver with antenna

Features

  • 72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C
  • On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
  • Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity
  • Built-in embedded GNSS patch antenna, low power consumption
  • The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated into any design.
  • Max navigation update rate
    Single GNSS up to 18 Hz
    2 Concurrent GNSS(GPS & GLONASS) up to 10 Hz
  • Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP
  • Velocity accuracy 0.05m/s
  • Cold start 26 s
    Aided cold starts: 2 s
    Hot start 1 s
  • Sensitivity
    Tracking & Navigation: –165 dBm
    Reacquisition: –158 dBm
    Cold start: –146 dBm
    Hot start: –155 dBm
  • Input voltage range: 4~6V
  • Uart (Tx, Rx) interface
  • Battery for HOT module start
  • Power LED(Red) & Time pulse LED(Blue)
  • Baudrate 9600 default
  • Dimensions: L26 x W16 x H7.5 mm
  • Weight: 7 gram
  • Can be easily mounted in your case by double sided tape
  • Supported by INAV/Betaflight/Ardupilot, etc.

Including

  • SAM-M8Q module, 1 pc
  • SH1.0-4P 15cm silicon wire, 1 pc
  • Transparent PVC Heat-shrink tube

Tips

  • GPS, GLONASS, SBAS, QZSS are enabled by default
  • Blue PPS LED blinking(1Hz) means 3D fixed
  • update rate 1Hz & baud rate 9600 default
  • Baud 9600~115200 supported by INAV
  • update rate 5Hz with INAV UBLOX Protocol
  • update rate 10Hz with INAV UBLOX7 Protocol
  • BF doesn’t support GPS position hold and RTH,  GPS Rescue mode is supported by BF3.5 or last.
  • The scratches on the ceramic antenna are the result of tuning the antenna by u-blox. Placing small nicks in the center of the long edges, or corners brings them into spec.


Customer Reviews

Based on 1 review Write a review