GEPRC GEP-F722-35A AIO Flight Controller DJI System 2-6S 8bits BLS ESC 26.5x26.5mm M2
I am glad to introduce a new member of GEPRC FC AIO, GEP-F7-35A, it is released now.
GEP-F7-35A adopts MCU STM32F722, which has powerful performance and higher computing speed. It has 5 full UART ports and can connect more external devices.
We designed a 6-pin connector for DJI AIR UNIT MODULE, just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance. Support OSD parameter adjustment, buzzer, led and other functions. It is 8.8g ultra-lightweight, and 26.5mm * 26.5mm mounting hole, suitable for most of the frames on the market.
We pursue lighter weight, smaller volume, more functions and better performance of FC.
- Model Name:GEP-F722-35A AIO
- IMU:MPU6000 gyro/accelerometer(SPI)
- Firmware target:GEPRC_F722_AIO
- OSD:Betaflight OSD w/ AT7456Ev
- UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
- USB:Micro USB
- BEC output:5V@1A
- Intergrated LC Filter
- ESC MCU:8BB21F16G
- Continuous current:35A
- MAX current:40A (10s)
- BlackBox: 16Mb
- Size:32x32mm Board
- Installing Hole:26.5×26.5mm,M2
- MCU: STM32F722, with strong performance and higher computing speed.
- It has 5 full UART ports, which connect more external devices
- 3Design 6p connector for DJI AIR UNIT MODULE, and just plug and play.
- The BLheili_S 35A ESC can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
- Support OSD parameter adjustment, buzzer, led and other functions.
- 8.8g ultra-lightweight
- 26.5mm * 26.5mm mounting hole, suitable for most frames
- 1x GEP-F7-35A AIO
- 1x XT30-7CM-18AWG Power cables
- 1x 35V220UF capacitance
- 1x SH1.0-6Pin to GH1.25-8Pin cables
- 8x M2*6.5mm Damping rings