Perfect affordable but also powerful charger. It's smart to detect lipo cell count and powerful enough (300W) to parallel charge lipos.
If you don't have power supply, if you know what you are doing:) you can easily grab an old PC power supply, solder a XT60 connector to it then ready to go with this little charger.
Also you can use larger capacity lipos as power bank to charge smaller ones in the field!
Lipo batteries contains high energy and could be dangerous if not operated properly. Please get enough knowledge about them before charging and discharging lipos. Advices above for advanced pilots. We are not responsible to consequence if things are done inappropriately.
Input Voltage: DC 7-32V
Output Voltage: 0-30V
Charge Current: 0.1-14.0A
Discharge Current: 0.1-3.0A
Max Charge Capacity: 300W
Max Discharge Capacity: 8W
Balancing Current: 1A/cell
Balance Cells: 2-6S
Supported Batt. Type:
Display: 2.4〃320×240 IPS LCD
Operating Temperature: 0-40°C
Storage Temperature: -20-60°C
Dimensions: 80x80x33.5 mm
This charger do not with power cable, you need to prepare by yourself.
Batteries pose a SEVERE risk of fire if not properly handled.
Read Entire operation manual before using charger.
This unit may emit heat during use.
Only operate this device in a cool ventilated area away from flammable objects.
Failure to observe safety procedures may cause damages to property or injury.
1x ISDT Q6 Plus Pocket Battery Balance Charger
2x Feamale XT60+ Plug
2x Plug Protector