Product Description:

Diatone Mamba Stack Basic F722 Mini MK3 F7 Flight Controller + 32bit F40 Mini PRO 2-6S ESC 20x20mm

Fixed

1. Add I2C function
2. When you connect the USB, the receiver and OSD settings can be saved
3. Increase the pad area
4. LED signal selection （when Mamba Led sys avaiable）
5. BEC short circuit protection
6. TVS instant high voltage protection 30V

Update

1. F405 models support F.prot（Most）
2. Upgrade the anti-interference cable
3. Use Typec（Most）
4. The pad area of Mini flight controller (20×20) increased by 140%

Added

1. Add self-recovery insurance to the receiver's 5V power supply
2. Increase the camera VCC power supply pad
3. Standard flight controller (30.5×30.5) adds spare pad
4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

FC Specifications:

• MAMBA Basic F722MINI MK3
• MCU: 216MHz STM32F722RET6
• GYRO: MPU6000
• Barometer: Yes
• OSD: Yes
• Blackbox: 16M Flash Memory
• Uarts: 6 Set
• ESC Soft: Dshot300/600
• ESC Telemetry: Yes
• Power Led: Yes
• LED Controller: BF LED
• S/F.Port: Yes
• RSSI: Yes
• Buzz: Yes
• Input: 2~6S Lipo (8.4~25.2V)
• TVS Protection: Yes
• BEC:3.3V 0.5A& 5V 2.5A
• MOUNTING: 20mm, M2

ESC Specifications:

• MAMBA F40 MINI PRO
• INPUT VOLTAGE: 2~6S Lipo (8.4V~25.2V)
• CONTINUE CURRENT: 40A×4
• BURST CURRENT: 45A (10S)
• BEC: No
• Target：MAMBA F40MINIPRO
• SOFT: Dshot300/600/1200
• TVS Protection: Yes
• MOUNTING: 20mm, M3/M2

Recommend For : 3inch / 4inch / Ultralight 5inch 

Supply :

• High-Frequency 470uF/35V ×1
• 8pin sh1.0 ×2
• 16AWG 60mm ×2
• AMASS Original XT60