iFlight Mach R5 Race FreeStyle FPV Drone 6S Analog BNF FrSky

PRODUCT DESCRIPTION

In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF!
Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times.
Quick-swap arm assembly for easy repair on your flying spot or race day.
Enhanced canopy design with low wind resistance for maximum speed and efficiency.

FEATURES:

• Super durable design, 6mm arms and 7075 CNC middle plate
• Super lightweight but superpower with our newest XING2 2506 motors

HIGHLIGHTS:

• XING2 2506 1850KV motors
• SucceX-D Mini F7 TwinG  
• SucceX Mini 55A
• SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

PRE-TUNED & PRE-SETUP:

-Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

-To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

-Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

-Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

-GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.

-Please check our linked article on "GPS Rescue Mode // Setup"

FRAME // ：Mach R5

• Wheelbase: 215mm
• Main body dimension: 152*152mm 
• Arm thickness: 6mm
• Bottom plate thickness: 3mm
• Top plate thickness: 2.5mm
• Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy
• TPU Camera plate
• FC: 30.5*30.5/25.5*25.5mm/20*20mm
• FPV Cam: 14mm /19mm Micro / 20mm

FC // SucceX-D Mini F7 2-6S TwinG 

Specification:

• MCU: STM32 F722
• Gyro: MPU6000
• Blackbox: 32MB
• BEC output: 5V  2.5A/9V  2.5 
• Barometer: NO
• Connector: Micro-USB
• OSD: IFLIGHT OSD (AT7456E)
• FC Firmware：IFLIGHT_F722_TWING 
• Mounting pattern: 20.5*20.5mm φ4mm
• Dimensions: 29*29mm
• Weight: 5.6g

ESC // SucceX Mini 55A 2-6S ESC 

Specification:

• Dimension: 31*29.5mm
• Mounting Holes: 20*20/φ4mm
  
• Input: 2-6S 
• Weight:10.8g
  
• Constant: 55A / Burst: 60A
• BLHeli: BLHeli 32
• Telemetry: No
• Current sensor: Yes
  
• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Target:  iFlight-G071-4IN1 
  

VTX // SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Specification:

• Power: PIT/25/200/400mW/600mW
  
• Antenna interface: MMCX
  
• VTX protocol : IRC Tramp
  
• Output 40 channels
  
• Size: 29*29mm
  
• Mounting pattern: 20*20Φ3/25*25 mmΦ2
• Weight: 4g
  

Mach R5 Analog Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1x Mach R5 Frame
• 1x RaceCam R1 Micro Camera
• 1x Sigma RHCP Ipex/UFL 5.8g antenna
• 2sets x Nazgul R5 3-blades (Set of 4 - Color may vary)
• 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Important:

• Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 
• If you have none frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.