Jumper T12 Pro Hall Radio Transmitter OpenTX JP4-in-1 Multi-Protocol
The Jumper T12 Pro with Hall Sensor Gimbals Radio has a multi protocol internal module and runs on OpenTX making this a feature packed transmitter and budget friendly.
This is the new version with mini USB charging port.
They support and bind to a long list of receivers inc Frsky , Futaba, Spektrum, Flysky, Walkera and many more. And of course they support the Popular D8 and D16 mode.
It also has voice support , full OpenTX support and a nice quality build finish all in all making this a very good choice for FPV, Freestyle and Fixed wing pilots.
TBS Crossfire Friendly and Compatible
T12 Pro does indeed support Crossfire and in CRSF mode with LUA script support and most importantly WITHOUT any hardware modification for end users. If your looking for the most compact, most affordable and most EPIC Crossfire compatible TX in the market today look no further than the Jumper T12. Jumper is committed to supporting OPEN hardware module platforms and will never try to force customers on to proprietary equipment.
yma, ASSAN and most other Chinese models
The T12 Pro comes standard with a neck strap and 18650 battery tray. The T12 Pro can also be powered with any LiPO or LiFE battery of a compatible size meaning users do not need to source their own uncommon sized Li-ion round cells or a round cell charger.
The T12 Pro, offers seamless intergration between OpenTX and module meaning protocals can be accessed and selected directly from the software GUI. Crossfire users can setup their equipment via LUA scripts.
Jumper JP4-in-1 Internal Module
The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also upgradable via USB input
DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more OpenTX firmware Multi-protocol transmitter internal module with TBS CRSF support
JR/FrSKY compatible module bay on rear side.
USB online firmware upgrade
Ultra-low power consumption, longer battery life
Up to 16 channels of output (depending on the receiver)
Open Source Firmware, all channels are fully programmable
Wide voltage input (2s lipo recommended)
Vibration reminder function
Support telemetry (depending on the receiver)
LUA Script support: Yes
Crossfire CSRF Compatible: Yes
Voice support: YES
Specs: Size: 158 * 150 * 58
Weight: 342g (without battery)
Working voltage: DC5-DC9V (factory with 2 * 18650 battery box, 2s Lipo recommended, batteries not included)
Get 18650 Battery here: Panasonic 18650 Battery
Channels: up to 16 channels (depending on the receiver)
Display: Upgrade 2.4 inch LCD display, 128* 64 resolution
Gimbal Type: HALL Sensor
JR/FrSKY compatible module bay on rear side
Upgrade method: USB online upgrade
Simulator mode: 3.5mm standard ppm output or USB HID
RF Chip Data
Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futaba SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
In the Box:
1x Jumper T12 Pro Radio Transmitter, Internal RF 4-in-1 Module
1x 18650 Battery Tray
1x Neck Strap
1x USB Cable