![Infinity RS Force V3 1400mAh 6S 130C 22.2V LiPo Battery XT60 [DG]](http://www.fpvfaster.com.au/cdn/shop/products/1_c8e3300c-2e6b-4dcc-9e6d-a1a958e8bf93_300x300.jpg?v=1645153546)
Spedix IS25 4IN1 25A 2-5S ESC 20x20mm
Specifications:
- Continuous Current: 25 amps
- Burst Current: 35 amps≥10 S
- Input Voltage: 2-5 Cell LiPo
- BEC: No
- Current Detection: Yes
- Dimensions: 29x32x5mm
- Mounting pattern: 20x20mm
- Mounting Holes: 3.7mm (M3 shoulder washers included)
- Firmware: BLHeli_S(QH-15)
- Input signal: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300 & Dshot600
Included:
- 1x 25amp 4in1 ESC
- 10cm red & black 16AWG wire
- 10x M3 shoulder washers (8 required, 2 spare)
- 25v 330μF capacitor
- 2x 1mm JST-SH 8-pin connectors
- 1x Datasheet
Notice:
- If 5S is used, it's recommended to solder the included capacitor.
- The amperage meter scale needs to be set to 200 for the current sensor to work.
![Infinity RS Force V3 1400mAh 6S 130C 22.2V LiPo Battery XT60 [DG]](http://www.fpvfaster.com.au/cdn/shop/products/1_c8e3300c-2e6b-4dcc-9e6d-a1a958e8bf93_600x600.jpg?v=1645153546)
